Dynamic Arp Inspection; Arp Access List - Panasonic GA-ML Series Manual

9.7.1.2

Dynamic ARP Inspection

9.7.1.2.1

ARP Access List

Use the following window to implement the settings on the ARP access
list and display its settings.
Choose Security > SAVI > IPv4 > Dynamic ARP Inspection > ARP
Access List to display the following window.
In the section of the ARP Access List, you can configure the following
parameter.
ｓ
Parameter
ARP Access List Name Enter the name of the ARP access list you use. The
Click Add to add new entries.
Click Edit to edit the configuration of the entry specified.
Click Delete to delete the entry specified.
Click Edit to display the following window.
9.7.1.2 Dynamic ARP Inspection 9.7.1.2.1 ARP Access List
Figure 9-46 ARP Access List
number of characters for the name can be up to 32.
Overview
9 Security
334