Panasonic GA-ML Series Manual page 188

Click Edit to display the following window.
Figure 6-7 IPv4 Interface (Edit and IPv4 Interface Settings）
In the section of Settings, you can configure the following parameters.
Parameter
State
IP MTU
IP Directed Broadcast This parameter enables or disables a function of an IP
Click Back to return to the previous window.
Click Apply to reflect the change.
This parameter enables or disables the global state of an
IPv4 interface.
Enter the value of Maximum Transmission Unit (MTU).
The range is from 512 to 16,383 (bytes). By default, the
value is set to 1,500 (bytes).
directed broadcast. Use this parameter to enable or
disable the conversion to a physical broadcast of the IP
directed broadcast, which is received on an interface
when the destination network is directly connected to a
switch.
6.4 Interface 6.4.1 IPv4 Interface
Overview
6 L3 Features
186