Smtp Settings - Panasonic GA-ML Series Manual

4.11

SMTP Settings

Use the following window to implement the SMTP (Simple Mail Transfer
Protocol) settings and display its settings.
Choose Management > SMTP Settings to display the following window.
In the section of the SMTP Global Settings, you can configure the
following parameters.
SMTP IP
SMTP IPv4
Server Address
SMTP IPv6
Server Address
SMTP IPv4
Server Port
SMTP IPv6
Server Port
Your Email Address
Transmission Interval Enter the value of a transmission interval. The range is
Figure 4-25 SMTP Settings
Parameter
Choose an IP address type of an SMTP server. The
options available are IPv4 and IPv6.
Choose IPv4 from SMTP IP, and then enter an IPv4
address of an SMTP server.
Choose IPv6 from SMTP IP, and then enter an IPv6
address of an SMTP server.
Choose IPv4 from SMTP IP, and then enter the port-
number (value) of an SMTP server. The range is from 1
to 65,535. By default, the value is set to 25.
Choose IPv6 from SMTP IP, and then enter the port-
number (value) of an SMTP server. The range is from 1
to 65,535. By default, the value is set to 25.
Enter the email address, which indicates a switch.
The number of characters for this character strings can
be up to 254.
from 0 to 65,535 (minutes). By default, the value is set
to 30 minutes.
4 Management
4.11 SMTP Settings
Overview
77