Poe Port Configuration - Panasonic GA-ML Series Manual

3.7.2

PoE Port Configuration

Use the following window to implement the settings on the power-supply
per port.
Choose System > PoE Configuration > PoE Port Configuration to
display the following window.
In the section of PoE Port Configuration, you can configure the
following parameters.
Parameter
From Port - To Port
Administrator Mode
Priority
Supply Limit
Click Apply to reflect a change.
Figure 3-21 PoE Port Configuration
Choose a port to configure.
This parameter enables or disables the power-supply for
a port. The options available are Up and Down. The
factory default settings is set to "Up".
This parameter configures the priority for the power-
supply The options available are Crit., High and Low.
The factory default settings is set to "Low".
This parameter configures the upper-limit of the
electricity of power supply (unit: 200mW). The factory
default settings is set to "Auto".
3.7.2 PoE Port Configuration
Overview
3 System
41