Log Backup To Rcp - Panasonic GA-ML Series Manual

14.2.3.3 Log Backup to RCP

Use the following to save a copy of system-logs or attack-logs on the
switch into an RCP server.
Choose Tools > Log Backup > Log Backup to RCP from the tool-bar to
display the following window.
You can configure the following parameters.
Parameter
RCP Server IP
User Name
Destination File
Log Type
Click Backup to start performing a backup.
Figure 14-20 Log Backup to RCP
Enter an IP address of the RCP server.
Enter the user-name of the RCP connection. The
number of characters for the name can be up to 32.
Enter the destination path and location on the RCP
server where a log-file is saved (or stored). The number
of characters for this field can be up to 64.
Choose the log type to save its backup into an RCP
server.
• System Log - The system log is backed up.
• Attack Log - The attack log is backed up.
14.2.3.3 Log Backup to RCP
Overview
14 Tool Bar
424