10.2.3
DDM Voltage Threshold Settings
Use the following window to implement the DDM voltage threshold
settings on the port specified and display its settings.
Choose DDM > DDM Voltage Threshold Settings to display the
following window.
In the section of DDM Voltage Threshold Settings, you can configure
the following parameters.
Parameter
Port
Action
Type
Value
Click Apply to reflect the change.
10 OAM (Operations, Administration & Management)
Figure 10-4 DDM Voltage Threshold Settings
Choose the port you use.
Choose an action to execute. The options available are
and
Add
Delete
Choose the type of the voltage threshold. The options
available are Low Alarm, Low Warning, High Alarm
and High Warning.
Enter the threshold; its range is from 0 to 6.55 (volts).
10.2.3 DDM Voltage Threshold Settings
Overview
.
372