Panasonic GA-ML Series Manual page 107

Parameter
Acceptable Frames
Checking Ingress
Clone
From Port/ To Port
Click Apply to reflect the change.
Click Back to return to the previous window.
Choose Host from VLAN Mode to display the following window.
Figure 5-25 VLAN Interface (Edit and Host)
In the section of VLAN Interface Settings, you can configure the
following parameters.
Parameter
VLAN Mode
Acceptable Frames
Checking Ingress
Clone
From Port/ To Port
Click Apply to reflect the change.
Click Back to return to the previous window.
Choose an operating option for acceptable frames. The
options available are Tagged only, Untagged only
and Admit All.
This parameter enables or disables a function of
checking ingresss.
If you choose this option, you need to enable the clone
function.
Choose the port you use.
Choose the option of VLAN mode. The options
available are Access, Hybrid, Trunk, Promiscuous and
Host.
Choose an operating option for acceptable frames. The
options available are Tagged only, Untagged only
and Admit All.
This parameter enables or disables a function of
checking ingress.
If you choose this option, you need to enable a clone
function.
Choose the port you use.
5 L2 Features
5.2.6 VLAN Interface
Overview
Overview
105