System Log Server Settings - Panasonic GA-ML Series Manual

Hide thumbs Also See for GA-ML Series:

Table of Contents

System Log Server Settings

Use the following window to implement the settings on the server, which

is used on the system-log, and to display its settings.

Choose System > System Log > System Log Server Settings to display

the following window.

In the section of Log Server, you can configure the following parameters.

Host IPv4 Address

Host IPv6 Address

Figure 3-12 System Log Server Settings

Enter an IPv4 address of a system-log server.

Enter an IPv6 address of a system-log server.

Enter the port-number of UDP (User Datagram Protocol)

of a system-log server. Set the number (or value) to 514,

or specify the value within the range from 1,024 to

65,535. By default, the value is set to 514.

Choose the severity of the information type, which is

logged. The values to choose: 0 (Emergencies),

1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings),

5 (Notifications), 6 (Information) and

7 (Debugging).

3.4.3 System Log Server Settings

Show Quick Links

Table of Contents