5
L2 Features
5.1
FDB (Forwarding Database)
5.1.1
5.1.1.1
Use the following window to implement the settings on a static-unicast
forwarding and display its settings.
Choose L2 Features > FDB > Static FDB > Unicast Static FDB to display
the following window.
In the section of Unicast Static FDB, you can configure the following
parameters.
Port/Disposal
Port Number
VID
MAC Address
Click Apply to add new entries based on the information specified.
Click Delete All to delete all the entries.
Click Delete to delete the entry.
5.1 FDB (Forwarding Database) 5.1.1 Static FDB 5.1.1.1 Unicast Static FDB
Static FDB
Unicast Static FDB
Figure 5-1 Unicast Static FDB
Parameter
When choosing Port, apply the port where a MAC
address entered exists. When choosing Disposal, drop
the MAC address from Unicast Static FDB.
Choose the port you use.
Enter the VLAN ID you use. The range is from 1 to
4,094.
Enter the MAC address where packets are transferred
to static. Specify a Unicast MAC address for this
address.
5 L2 Features
Overview
80