Port Security Port Settings - Panasonic GA-ML Series Manual

9.1.2

Port Security Port Settings

Use the following window to implement the port-security settings on the
port specified and display its settings.
Choose Security > Port Security > Port Security Port Settings to display
the following window.
In the section of Port Security Port Settings, you can configure the
following parameters.
Parameter
From Port/ To Port
State
Maximum
Violation Action
Figure 9-2 Port Security Port Settings
Choose the port you use.
This parameter enables or disables a port-security
function on the port specified.
Enter the maximum number of secure MAC addresses
to permit on the port (s) specified. The range is from 0
to 3,328. By default, the value is set to 32.
Choose the violation action to conduct. The options
available are as follows.
• Protect - Although all the packets are deleted from
the host, which is insecure as the port security
process level, the security-violation count is not
increased.
• Restrict - All the packets coming from the host,
which is insecure as the port-security-process level,
are deleted. The security-violation count is increased
to be recorded on the system log.
• Shutdown - If a security-violation occurs, the port
becomes shut down to be recorded on the system-
log.
9.1.2 Port Security Port Settings
Overview
9 Security
280