Panasonic GA-ML Series Manual page 132

Parameter
Group ID
Mode
Click Add to add a new entry based on the information specified.
Click Delete Member Ports to delete the member ports from the port-
channel specified.
Click Delete Channels to delete entries.
Click Show Detail to display details on the entry.
Click Show Detail to display the following window.
Figure 5-41 Link Aggregation (Show Detail.)
Click Edit to edit the entry settings.
Click Back to return to the previous window.
Enter the channel-group number. The range is from 1 to
32. If a physical port participates in a channel group for
the first time, the port-channel is automatically created.
One interface can participate in one channel group,
only.
Choose the mode option. The options available are
Static, Active and Passive. If the Static mode is
specified, the channel group type is static. If the Active
or Passive mode is specified, the channel group type is
the Link Aggregation Control Protocol (LACP). A
channel group consists of static members or LACP
members. As the type of channel group is determined,
other types of interfaces cannot participate in its
channel group.
5 L2 Features
5.5 Link Aggregation
Overview
130