Authentication Status Table - Panasonic GA-ML Series Manual

9.4.2

Authentication Status Table

Use the following window to display an authentication state table and its
information. In addition, the authentication aging time can be configured
in this window.
Choose Security > Authentication > Authentication Status Table to
display the following window.
In the section of Authentication Status Table, you can configure the
following parameters.
Parameter
Authentication Aging
Time
Sort By - MAC
Sort By - Port
Click Apply to check the content changed.
Click Find to search and display the entries based on the search condition
specified.
Figure 9-29 Authentication Status Table
Enter the value of time-out of the MAC/Web
authentication session. The range is from 0 to 65,535
(minutes).
If you choose this option, an authentication session is
displayed in a sequential order of MAC addresses.
If you choose this option, an authentication session of
the port specified is displayed.
• From Port/ To Port - Choose the port you use.
9.4.2 Authentication Status Table
Overview
9 Security
315