Firmware Upgrade From Ftp Servers - Panasonic GA-ML Series Manual

14.2.1.3 Firmware Upgrade from FTP Servers

Use the following window to upgrade firmware in a switch from an RCP
server.
Choose Tool >Firmware Upgrade ＆ Backup > Firmware Upgrade
from an FTP Server on the tool-bar to display the following window.
Figure 14-4 Firmware Upgrade from the FTP Server
You can configure the following parameters.
Parameter
FTP Server IP
TCP Port (1-65535)
Username
Password
Source File
Destination File
Click Upgrade to start upgrading.
14.2.1.3 Firmware Upgrade from FTP Servers
Enter an IP address of the FTP server.
Enter the TCP port of the FTP connection.
Enter the user-name of the FTP connection. The number
of characters for the name can be up to 32.
Enter the password of the FTP connection.The number
of characters for the name can be up to 15.
Enter the path and name of a source file of the
firmware file existing in an FTP server. The number of
characters for this field can be up to 64.
Enter the destination path and its location on the switch
where new firmware is saved. The number of characters
for this field can be up to 64.
Overview
14 Tool Bar
408