Digital Diagnostic Monitoring Menu - Panasonic PN28160K Operation Manual

4.7.10. Digital Diagnostic Monitoring Menu

On the Advanced Switch Configuration Menu, pressing "G" opens the Digital
Diagnostic Monitoring Menu, as shown in Fig. 4-7-32. On this screen, you
can show the SFP status and set the alarm.
PN28160K Local Management System
Advanced Switch Configuration -> Digital Diagnostic Monitoring Menu
Limit Trap Status
SFP Port Number
Vender Name
Vender Serial Number :
RX Power
(dBm)
----------- ----------- ------------ --------- ------------
Status
High Alarm
High Warning
Low Alarm
Low Warning
-------------------------------- <COMMAND> -----------------------------------
[N]ext SFP port
[P]revious SFP port
Set Limit Trap [S]tatus
Command>
Enter the character in square brackets to select option
Fig. 4-7-32 Digital Diagnostic Monitoring Menu
Screen Description
Limit Trap Status: Shows the trap sending settings for detecting DDM alarm or warning.
Enabled:
Disabled:
SFP Port Number Shows the current SFP port.
Tranceiver Type Shows the kind of SFP.
Vender Name Shows the SFP vender name.
Vender Product Shows the SFP product number.
Number
Vender Serial Shows the SFP serial number.
Number
Rx Power (dBm) Shows the Rx power.
Tx Power (dBm) Shows the Tx power.
Temp (deg. C) Shows the Temparature.
Voltage (V) Shows the Voltage.
Bias Current Shows the bias current.
(mA)
Status Shows the current value.
: Disabled
: 15
:
TX Power
(dBm)
0.0000 0.0000
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
Set [R]X Power Limit
Set [T]X Power Limit
Set [V]oltage Limit
The trap sending is enabled.
The trap sending is disabled. (Factory default setting)
223
Transceiver Type
Vender Product Number :
Temp Voltage
(deg. C) (V)
0.0000 0.0000
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
Set T[e]mp Limit
Set [B]ias Current Limit
[Q]uit to previous menu
:
Bias Current
(mA)
0.0000
0.0000(A)
0.0000(A)
0.0000(A)
0.0000(A)