Digital Diagnostic Monitoring Menu - Panasonic PN28168 Operation Manual

4.6.12. Digital Diagnostic Monitoring Menu

On the Advanced Switch Configuration Menu, pressing "G" opens the Digital Diag-
nostic Monitoring Menu screen as shown in Fig. 4-76. On this screen, you can
change the information of Digital Diagnostic Monitoring.
PN28168 Local Management System
Advanced Switch Configuration -> Digital Diagnostic Monitoring Menu
Limit Trap Status
SFP Port Number
Vendor Name
Vendor Serial Number :
Status
High Alarm
High Warning
Low Alarm
Low Warning
-------------------------------- <COMMAND> -----------------------------------
[N]ext SFP Port
[P]revious SFP Port
Set Limit Trap [S]tatus
Command>
Enter the character in square brackets to select option
Fig. 4-76 Digital Diagnostic Monitoring Configuration
Screen Description
Limit Trap Status
SFP Port Number
Transceiver Type
Vendor Name
Vendor Product Number
Vendor Serial Number
Rx Power(dBm)
Tx Power(dBm)
Temp(deg.C)
Voltage(V)
Bias Current(mA)
Status
High Alarm
High Warning
Low Alarm
Low Warning
: Disabled
: 1
:
RX Power TX Power
(dBm) (dBm)
----------- ----------- ------------ --------- ------------
None None
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
Set [R]x Power Limit
Set [T]x Power Limit
Set [V]oltage Limit
Displays the trap sending settings for change state.
Displays the port to insert SFP modules.
Displays the type of SFP modules.
Displays the vendor name of SFP modules.
Displays the vendor product number of SFP modules.
Displays the vendor serial number of SFP modules.
Displays the Rx power of SFP modules.
Displays the Tx power of SFP modules.
Displays the temperature of SFP modules.
Displays the voltage of SFP modules.
Displays the bias current of SFP modules.
Displays the state of SFP modules.
Displays the upper threshold of alarm.
Displays the upper threshold of warning.
Displays the lower threshold of alarm.
Displays the lower threshold of warning.
Transceiver Type
Vendor Product Number :
Temp Voltage
(deg. C) (V)
None None
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
0.0000(A) 0.0000(A)
Set T[e]mp Limit
Set [B]ias Current Limit
[Q]uit to previous menu
161
: Unknown
Bias Current
(mA)
None
0.0000(A)
0.0000(A)
0.0000(A)
0.0000(A)