Port Monitoring Config - Panasonic GA-AS16TPoE+ Manual

5.2.8.

Port Monitoring Config

Select "Advanced Config" and then "Port Monitoring Config" to open the screen
shown in Figure 5-22. On this screen, you can configure the port monitoring set-
tings.
Screen Description
Monitor Output Port
Monitor Target Port
Monitor Direction
Monitor Status
Note: Mirror packets in transmission direction will include the VLAN tag of the
received VLAN ID.
Figure 5-22 Port Monitoring Configuration
Indicates a port number of a port used to monitor packets for another port.
Indicates a port number of a port being monitored.
The factory default setting is 2.
Displays which of transmit packets or receive packets are monitored at the
port to be monitored. The factory default setting is "Send/Recv".
Recv Monitors receive packets.
Send Monitors transmit packets.
Send/Recv Monitors both transmit and receive packets.
Indicates whether monitoring is enabled.
The factory default setting is "Disable".
Enabled Monitors packets.
Disabled Does not monitor packets.
42