Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Pay attention to the information stated in the following, and proceed as instructed.
The symbols presented in following paragraphs are all the possible symbols that
could be present on Nokia equipment, but are not all necessarily present on the
equipment this handbook refers to.
1.3.1 Dangerous electrical voltages
1.3.1.1
The warning label in
Vdc).
Figure 1
Dangerous voltage
If it is a Class 1 equipment connected to mains, then the label in
the equipment must be grounded before you connect it to the power supply voltage;
for example:
Figure 2
Ground protection warning
•
Harmful optical signals
Labeling:
Figure 1
is affixed next to dangerous voltages (>42.4 Vp; >60
Safety awareness
Figure 2
states that
49