Throttle Cable Replacement; Throttle Cable Removal - Toro 30284 Service Manual

LINKAGE
15. T2 Models: Install a cable tie securing the choke
cable to the right side of the control panel (Fig.
0736).
4
16. Make sure that the choke valve turns from the fully
closed position to the fully open position when
actuating the choke control handle.
4-114
Fig 0736 PICT-2052

Throttle Cable Replacement

Throttle Cable Removal

1. Turn the engine off and remove the key from the
ignition.
2. Loosen the clamp that secures the throttle cable to
the engine (Fig. 0737).
Fig 0737
3. Remove the throttle cable from the clamp and
remove the z-bend from the throttle control lever
(Fig. 0738).
Fig 0738
Floating Deck Mid-Size Service Manual
PICT-0652
PICT-0657