Hour Meter - Toro Greensmaster Flex 1018 Service Manual

Hour Meter

Testing the Hour Meter
Electrical System: Component Testing
g262085
1. Hour meter
2. Controls cover
The hour meter used on the Greensmower records the amount of time that
the engine is running.
1. Ensure that the key switch is in the OFF position.
2. Remove the spark plug wire from the engine spark plug.
3. Locate the wire harness connector at the rear of the hour meter. Unplug the
harness connector from the hour meter.
Figure 45
3. Handle assembly
Page 6–8 Greensmaster ® Flex 1018/1021
20247SL Rev A