Mower Deck Replacement; Mower Deck Removal - 48, 54 & 60 Inch Deck - Toro titan zx Service Manual

Mower Deck Replacement

Mower Deck Removal - 48, 54 & 60 Inch
Deck
1. Park the machine on a level surface and disengage
PTO switch.
2. Move the motion control levers outward to the
neutral position and engage parking brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
4. Lower the mower to the 3 inch (76mm) height-of-cut
position.
5. Remove PTO belt as shown in this chapter.
6. Lower the mower to the lowest height-of-cut.
7. Remove the (2) cotter pins and (2) washer securing
the front pivot pin to the deck. Remove the pivot pin
from the deck (Fig. 093).
C
Fig. 093
A. Link pin
B. Washer
Toro TITAN 2014 Service Manual
A
B
fig. 65 G024314
C. Hair pin cotter
MOWER DECK
8. Safely lift upward on the mower deck to relieve
tension from the chain links.
9. Carefully maneuver the top chain link up and off the
lift rod hooks. Repeat for the three remaining chain
lift points (Fig. 094).
A B C D
Fig. 094
A. Deck lift arm
B. Chain
10. Raise the height-of-cut to the transport position.
11. Slide the mower out from underneath the machine.
A B C
D
fig. 66 G024313
C. Hook
D. Adjustment bolt
6-7
6