Replacing The Mower-Deck Belts For 102 Cm Mowers; Replacing The Right Mower-Deck Belt; Replacing The Left Mower-Deck Belt - Toro GrandStand 74534TE Operator's Manual

1. Belt
2. Spring-loaded idler pulley
Replacing the Mower-Deck
Belts for 102 cm Mowers
Important: The fasteners on the covers of this machine
are designed to remain on the cover after removal.
Loosen all of the fasteners on each cover a few turns so
that the cover is loose but still attached, then go back
and loosen them until the cover comes free. This will
prevent you from accidentally stripping the bolts free
of the retainers.
Replacing the Right
Mower-Deck Belt
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Loosen the bolts and remove the belt covers with the
bolts attached to them.
4. Remove the spring from the anchor post on the
idler-pulley arm (Figure
5. Remove the worn mower belt
6. Install the new mower belt around the deck pulleys and
idler pulley (Figure 64
7. Install the spring onto the anchor post on the
idler-pulley arm (Figure 64
8. Install the belt covers onto the cutting unit and secure
the bolts.
Figure 64
3. Spring
64).
(Figure 64).
).
).
1. Belt
2. Spring
Replacing the Left Mower-Deck
Belt
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Loosen the bolts and remove the belt covers with the
bolts attached to them.
4. To remove the left mower belt, the right mower belt
needs to be removed first; refer to
Mower-Deck Belt (page
5. Remove the spring from the anchor post on the
idler-pulley arm
6. Remove the worn mower belt
7. Install the new mower belt around the deck pulleys, the
clutch pulley, and the idler pulley
8. Install the spring onto the anchor post
9. Install the right mower belt; refer to
Right Mower-Deck Belt (page
10. Install the belt covers onto the cutting unit and secure
the bolts.
47
Figure 65
3. Spring-loaded idler pulley
Replacing the Right
47).
(Figure 64).
(Figure 64).
(Figure 64).
(Figure
Replacing the
47).
64).