Destination Address Entry With Global Address Search - Xerox WorkCentre C226 User Manual

Network Scanner Operation
NOTE:
NOTES:

Destination address entry with global address search

T UVWXYZ
4-30
If you frequently use broadcasting to send documents to the same group of
destinations, it is convenient to program those destinations into a group key. (page 4-
14)
10. Touch the [ADDRESS REVIEW] key and check the destinations.
Address
Directory
-Mail Address Sender List
Address Review
Scanner
Fax
11. Continue from step 12 of "Basic Transmission Method" (page 4-26).
• To cancel a broadcast transmission when selecting destinations, press the
[CLEAR ALL] key.
• When you perform a broadcast transmission, the compression mode set with the
key operator program, "Compression mode at broadcasting" (page 4-67), is used
as the file compression mode for all destinations. The default settings are
"MEDIUM" for colour scanning and "HIGH (G4)" for black and white scanning.
1. Touch the [GLOBAL ADDRESS SEARCH] key.
Settings
Global
Address Search
Address Review
ABC Group
2. Touch the desired LDAP server key.
Server Change
Document division 1
Document division 2
A1210 project team
Software development centre
To search the highlighted server, proceed to step 3.
When the [ADDRESS REVIEW] key is touched, only the
entered destinations are displayed. If you need to delete
a destination, touch its key.
Touch the [OK] key to return to the initial screen.
The server change screen is displayed. If only one
LDAP server has been set, the global address search
screen is displayed. Proceed to step 4.
Cancel OK
1/2
Xerox WorkCentre C226 User Guide