Xerox WorkCentre C226 User Manual page 367

NOTE:
NOTE:
Xerox WorkCentre C226 User Guide
4. Touch the [DATA STORE] key.
Pollin
Data Store Print
5. Touch the [PUBLIC BOX] key.
Public Box
6. Set the original size, resolution, exposure and other scanning conditions as
needed. (See "Manually Setting the Scanning Size" on page 5-13.)
7. Press the [BLACK COPY START] key.
If you used the document glass and have another page to scan, change the pages
and then press the [BLACK COPY START] key again. Repeat this procedure until
all pages have been scanned, and then touch the [READ-END] key that appears
in the message screen. When the document data has been stored in the Public
Box, "JOB STORED." appears on the screen, after which you will return to the
initial screen.
To cancel scanning
To cancel scanning of a document while scanning is in progress, press the [C] key. To
delete a document that has already been scanned, see "Deleting document data from
the Public Box" on page 5-41.
The machine has been initially set to automatically clear document data from the
Public Box after polling takes place and the data is sent to the polling machine. You
can use the key operator program to change this setting so that the data is not
automatically cleared and polling can take place repeatedly.
Transmission and Reception Using the Polling Function
This specifies that the document will be scanned into the
Public Box.
The document is scanned. If other document data has
previously been stored, the new data will be added on
after the old data.
5-39