Specifications (Stand/1-Tray Unit/3-Tray Unit); Loading Paper In The Duplex Module/2-Tray Unit - Xerox WorkCentre C226 User Manual

Specifications (stand/1-Tray Unit/3-Tray Unit)

Name
Paper size/weight
Paper capacity
Power supply
Dimensions
Weight

Loading paper in the Duplex Module/2-Tray Unit

NOTE:
Xerox WorkCentre C226 User Guide
Stand/1-Tray Unit
A3, B4, A4, A4R, B5, B5R, A5, Extra. (11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2")
Paper recommended for colour (80 g/m2 or 21 lbs.): 500 sheets;
Xerox standard paper (80 g/m2 or 21 lbs.): 500 sheets
600 mm (W) x 642 mm (D) x 403 mm (H) (23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H))
Approximately 22.5 kg or 49.6 lbs.
Specifications are subject to change for improvement without notice.
Upper tray:
The upper tray contains a Duplex Module that automatically turns print paper over for
automatic two-sided printing.
Middle and lower paper trays:
The middle and lower trays are paper trays.
Up to 500 sheets of paper recommended for colour or Xerox-recommended plain
paper can be loaded in these trays. The method of loading paper is the same as for
Paper Tray 1 in the main unit. See the explanation on page 1-21.
If the size of paper being loaded is different from the previous size, or is an extra size,
or if the paper type is different from the previous type, you must change the paper tray
settings in the custom settings. Change the settings as explained in "Setting the paper
type (except the Bypass Tray)" on page 1-33 and "Setting the paper size when an
extra size is loaded" on page 1-34.
/ 64 to 105 g/m2 or 17 to 28 lbs.
Supplied from the main unit
(not including the adjuster)
Approximately 29.5 kg or 65.0 lbs.
Loading Paper
3-Tray Unit
1-29