General Information
1-50
Exit area
Fusing area
1. Open the Duplex Bypass/Inverter Unit.
2. Remove the misfed paper as shown in the illustrations below.
Models with an exit tray attached to the Duplex
Bypass/Inverter Unit:
Gently remove the misfed paper as shown in the illustra-
tion, taking care not to tear the paper.
Models without the Duplex Bypass/Inverter Unit:
Gently remove the misfed paper as shown in the illustra-
tion, taking care not to tear the paper.
Upper exit tray:
Gently remove the misfed paper as shown in the illustra-
tion, taking care not to tear the paper.
Grasp the finger hold and gently open the unit.
If paper is misfed in the transport area, turn roller rotat-
ing knob A in the direction of the arrow to remove the
misfed paper.
Xerox WorkCentre C226 User Guide