Setting For F-Code Relay Broadcast Memory Boxes (Recipient) - Xerox WorkCentre C226 User Manual

Fax Unit

Setting for F-Code Relay Broadcast Memory Boxes (Recipient)

NOTES:
5-86
3. Use the numeric keys to enter a 4-digit number.
F-Code Memory Box / Confidential
No.003
Print Pin
Enter The Print Pin Via The 10-Key Pad,Then Press [Ok].
• If you make a mistake, press the [C] key. All digits will be cleared, so you will
need to re-enter the number from the first digit.
• To cancel entry of the print PIN, touch the [CANCEL] key. You will return to the
screen of step 2 without programming a print PIN.
4. Touch the [OK] key.
You will return to screen of step 2 and the entered print PIN will appear.
5. To exit, touch the [EXIT] key.
To program another memory box, touch the [NEXT] key.
Next Exit
Program the end receiving machines to which document data received in the F-code
relay broadcast memory box will be transmitted when your machine is a relay
machine.
• Up to 30 end receiving machines (30 one-touch keys or group keys) can be
programmed. If you attempt to program more than this number, a message will
appear and programming will not be possible.
• Only destinations that have been programmed in auto dial keys (one-touch keys
or group keys) can be selected. If you need to include a destination that has not
been programmed in an auto dial key, first program it in a one-touch key (page 5-
68) and then program the destination as an end receiving machine.
Next Exit
Cancel Ok
Touching the [EXIT] key returns you to the screen of
step 3 on page 5-82.
Touching the [NEXT] key returns you to the screen for
programming a new memory box (the screen of step 4
on page 5-82).
Xerox WorkCentre C226 User Guide