Xerox WorkCentre C226 User Manual page 425

Note
NO F FUNC
NO F-CODE
M. BOX: [xxxxxx]
FAIL xx(xxxx)
REJECTED
Xerox WorkCentre C226 User Guide
F-code transmission was attempted, however, the other machine does not sup-
port F-code communication.
An F-code transmission was refused by the other machine because of an incor-
rect sub-address or other reason.
Data was received to a confidential or relay broadcast memory box, or data was
sent from a memory polling box.
The name of the memory box appears in [xxxxxx], and the type of F-code opera-
tion (relay request reception, polling memory transmission, or confidential recep-
tion) appears in
The communication handshake signals or image signals were distorted due to
line conditions or other reasons, and communication was not successful.
First two digits of communication error number: Error code from 00 to 31
appears.
Last four digits of communication error number: Codes for use by service techni-
cians.
A fax was sent from a party that has been blocked by the anti junk fax function.
When a Transaction Report Is Printed
Explanation
.
5-97