Entering A Pause - Xerox WorkCentre C226 User Manual

Fax Unit
Fax Memory:100%
5-20
4. If needed, adjust the resolution setting (see page 5-14).
OSU
Standard
Resolution
Auto A4
Original
5. If needed, adjust the exposure setting (see page 5-16.)
Auto
Exposure
Standard
Resolution
Auto
Original
6. Dial the fax number.

Entering a Pause

Pause Next Add
Address
Auto Reception
Directo
Sub Add
The [PAUSE] key is also be used to link numbers together (this is called chain
dialing). Enter a number, touch the [PAUSE] key to enter a hyphen "-", and then
enter another number with the numeric keys or by pressing a one-touch key. The
linked numbers will be dialed as one number.
* The duration of each pause can be changed with the key operator program.
The number that you entered appears in the message
display. If it is not correct, press the [C] key and re-enter
the number. You can also use the [REDIAL] key or an
auto-dial number
If you need to insert a pause between digits when dial-
ing out from a PBX or when dialing an international num-
ber, touch the [PAUSE] key in the upper right corner of
the screen.
Each time you touch the [PAUSE] key, a hyphen ("-")
appears and a 2-second pause* is inserted.
Xerox WorkCentre C226 User Guide