About The Settings - Xerox WorkCentre C226 User Manual

General Information

About the settings

1-40
The procedure for setting the clock is shown below as an example.
Custom Settings
Clock Adjust
YEAR Year Month
MONTH
2004 11
Daylight Saving Time Setting
3. Touch the year, month, day, hour or minute key, and then use the or key to adjust
the setting.
• If you select a non-existent date (for example, Feb. 30), the [OK] key will grey
out to prevent entry of the date.
• Select [DAYLIGHT SAVING TIME SETTING] checkbox to have the time auto-
matically change at the beginning and end of daylight saving time.
4. Touch the [OK] key.
5. To finish the setting operation, touch the [EXIT] key.
Custom Settings
Display
Total Count
Contrast
Address
Tray Settings
Control
Keyboard
Key Operator Programs
Select
Total count
This displays the following sheet counts:
The number of sheets printed in copy, print, and fax modes.
The number of sheets transmitted using the fax function and scanned using the
network scanner function.
The number of sheets used by optional equipment such as the DADF and the
Duplex Module of the Duplex Module/2-Tray Unit, and the number of sheets stapled by
the Saddle Stitch Finisher.
In the case of only:
• Each sheet of paper that is A3 (11" x 17") size or larger is counted as two sheets.
• Each sheet of paper used for automatic two-sided copying is counted as two
sheets (A3 (11" x 17") paper is counted as four sheets). (When an optional Duplex
Module/2-Tray Unit and a Duplex Bypass/Inverter Unit are installed.)
OK
Day DAY Hour Minute
HOUR MINUTE
00
01 00
Date Format
Exit
List Print
Clock
Fax Data
Receive Mode
Forward
Xerox WorkCentre C226 User Guide