Xerox WorkCentre C226 User Manual page 337

One-touch key
1
display
Display
2
switching keys
[CONDITION
3
SETTINGS]
[ABC GROUP]
4
Index keys
5
NOTE:
Xerox WorkCentre C226 User Guide
Address directory screen (alphabetically ordered)
The screen below appears initially when the address directory is set as the initial
screen using "Default display settings" in the "Fax Unit" section of the WorkCentre
C226 System Administration Guide.
Ready To Send.
A
C
1
E
G
Frequent Use
ABCD
This shows the one-touch keys that have been stored on the selected "index card".
The key type is indicated by the icon at the right. One-touch keys in which a fax num-
ber is stored are indicated by a "
This can be changed to 6 or 12 using the key operator program.
In cases where the one-touch keys cannot all be displayed on one screen, this shows
how many screens are left. Touch the
This displays the condition settings screen, which is used to set various conditions.
Touch this key to switch between the alphabetical index and the group index.
One-touch key destinations are stored on each of these index cards (alphabetical
index or group index). Touch this key to switch between the indexes.
Group indexes make it possible to store one-touch keys by group with an assigned
name for easy reference. This is done with the custom settings (refer to pages 5-68
and 5-74). Frequently used one-touch key destinations can be stored on the [FRE-
QUENT USE] card for convenient access.
The screen shown above is the alphabetical address directory. If desired, the initial
screen can be set to the group address directory.
Fax Mode (Condition Settings Screen)
2
Speaker
B
D
F
H
UVWXYZ
EFGHI JKLMN OPQRST
5
" icon. The display is initially set to show 8 keys.
keys to move through the screens.
Redial
Condition
3
Settings
Sub Address
Address Review
ABC Group
4
5-9