Erase - Xerox WorkCentre C226 User Manual

Erase

Xerox WorkCentre C226 User Guide
The erase function is used to erase the shadow lines on copies produced when copy-
ing thick originals or books. The erase modes that can be selected are shown below.
The erase width is approximately 10 mm (1/2") in it's initial setting.
Original
EDGE ERASE
Eliminates shadow lines around the edges of copies caused when heavy paper or a
book is used as an original.
CENTRE ERASE
Eliminates shadow lines produced by the bindings of bound documents.
EDGE + CENTRE ERASE
Eliminates shadow lines around the edges of copies and eliminates the shadow at the
centre of copies.
1. Touch the [ERASE] key on the SPECIAL MODES screen.
Erase
Covers
Copy
The erase setting screen will appear.
The erase icon ( ) will also appear in the upper left of
the screen to indicate that the function is turned on.
T
Special Modes
2-41