Network Setup; Printer Configuration Settings; Making Configuration Settings - Xerox WorkCentre C226 User Manual

Printer Operation

Making Configuration Settings

3-44
Log
Status Message
Use this to set up a schedule for sending specified count information such as the
total count and the output counts for the printer and copy functions. The e-mail
addresses of the recipients and the schedule must be entered.
Alerts Message*
This is used to send information on error conditions such as when the machine
runs out of paper or toner, or a misfeed or failure occurs. The e-mail addresses of
the recipients of the information must be entered.
* This function cannot be used if the optional Fax Unit is installed.

Network Setup

Network Card
A link to the network card Web page for configuring the print server card (network
interface card) is provided. The Admin password is the same as the Web Page pass-
word of the network card.
Services
Configure information concerning the e-mail system.
LDAP
This is used to configure advanced settings when using an LDAP server and user
authentication.

Printer Configuration Settings

This section explains the printer configuration settings.
The printer configuration settings are used to configure basic printer settings. The fol-
lowing settings are available.
• Default settings: Basic settings used in printing (page 3-46)
• PCL settings: Set the PCL symbol set and fonts (page 3-47)
Xerox WorkCentre C226 User Guide