Own Number Sending - Xerox WorkCentre C226 User Manual

Fax Unit
NOTES:

Own Number Sending

11/JUN/2004/FRI 15:00
(1)
5-42
Restricting polling access (polling security)
If you wish to prevent unauthorised fax machines from polling your machine, turn on
the polling security function. When this function is turned on, polling permission will
only be granted if the fax number of the polling machine (as programmed in that
machine) matches one of the fax numbers you have programmed in your machine as
passcode numbers. Up to 10 fax numbers can be programmed as passcode numbers.
To turn on the polling security function and program passcode numbers, use the key
operator program as explained in "Passcode number setting" in the "Fax Unit" section
of the WorkCentre C226 System Administration Guide.
• If you do not use the polling security function, the document will be sent to any fax
machine that polls you.
• To use polling memory with polling security enabled, the sender's number of the
polling machine must be programmed in that machine and in your machine.
This function prints the date, time, your programmed name, your programmed fax
number, and the transmitted page number at the top centre of each page that you fax.
All pages that you fax include this information.
Example of fax page printed out by the receiving machine
XEROX PLANNING DIV.
(2)
(1) Date and time: programmed in the custom settings (see "Custom Settings" on
page 1-37).
(2) Own name: programmed with the key operator program. (See the "Fax Unit" sec-
tion of the WorkCentre C226 System Administration Guide.)
(3) Own fax number: programmed with the key operator program.
(4) Transmitted page number: 3-digit number appearing in the format, "page number/
total pages" (only the page number appears if you use manual transmission or
Quick On-Line transmission). If desired, you can use the key operator program to
omit the page number.
FAX No. 0666211221
(3)
Xerox WorkCentre C226 User Guide
P. 001/001
(4)