Sending A Fax After Talking (Manual Transmission) - Xerox WorkCentre C226 User Manual

Fax Unit

Sending a Fax after Talking (Manual Transmission)

NOTE:
NOTE:
5-62
If the other fax machine is set to manual reception, you can talk to the other party and
then send a fax without breaking the connection. This procedure is called manual
transmission.
Automatic redialing (see "If the receiving party is busy" on page 5-25) will not take
place if the line is busy.
1. Make sure the machine is in fax mode.
/
FAX] key.
2. Load the original.
If you have loaded the original on the document glass, you can only send one page by
manual transmission.
3. Set the original size, resolution, exposure and other scanning conditions as
needed.
• Manually Setting the Scanning Size (see page 5-13)
• Selecting the Resolution (see page 5-14)
• Selecting the Exposure (see page 5-16)
4. Lift the extension phone.
The [SPEAKER] key can also be used. (See "One-touch dialing" on page 5-17.)
5. Dial the number of the other party or touch a one-touch key.
Corpo.Tps
Xerox Group
6. Speak to the other party when they answer.
If you used the [SPEAKER] key to dial, lift the extension phone to talk.
When the [IMAGE SEND] key light is on, the machine is
in fax mode. If the light is not on, press the [IMAGE
SEND] key.
When the network scanner option is installed, touch this
key to return to the initial screen of fax mode or scanner
mode, whichever mode was selected last. To switch to
fax mode from scanner mode, touch the [SCANNER/
If the condition settings screen appears, touch the
[ADDRESS DIRECTORY] key to display the address
Spe
directory screen.
You cannot use a group key or a one-touch key that
includes a sub-address and passcode.
Xerox WorkCentre C226 User Guide