Checking The Size Of A Loaded Original - Xerox WorkCentre C226 User Manual

Fax Unit
NOTE:

Checking the Size of a Loaded Original

NOTE:
5-12
Do not place any objects under the original size detector plate. Closing the document
glass cover with an object underneath may damage the original size detector plate
and prevent correct detection of the document size.
Regardless of the size of the original, place the original on the left side of the docu-
ment glass. (Align the original with the document glass scale and centering mark.)
Place the original in the appropriate position for its size as shown below.
Document glass scale
mark
A4 A3
B5
B4
A5
When a standard-size* original is placed, the origi-
nal size is automatically detected (automatic origi-
nal detection function) and displayed in the top half
of the [ORIGINAL] key. Check the key to make
sure that the original size has been correctly
detected.
: [AUTO] appears when the automatic original
1
detection function is operating.
: Displays the original size.
2
If a non-standard size original is placed or if you wish to change the scanning size, fol-
low the steps below to manually set the original scanning size
* Standard sizes that can be detected are as follows:
A5, B5, B5R, A4, A4R, B4, A3, 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14",
11"x17". If a non-standard size original is loaded (including special sizes), the closest
standard size may be displayed, or the original size may not appear at all.
Document glass scale
mark
A4
R
B5
R
A5
R
Xerox WorkCentre C226 User Guide
Standard
Resolution
AUTO A4
Original