Xerox WorkCentre C226 User Manual page 88

General Information
NOTE:
NOTES:
NOTE:
1-62
5. Remove the empty staple cartridge.
If staples remain, the staple cartridge cannot be removed.
6. Insert a new staple cartridge into the staple box.
• Do not remove the tape from the cartridge before inserting the staple cartridge into
the box.
• Make sure that the new staple cartridge is locked securely in the staple box. Press
down on the staple box cover until you hear a "click" indicating that the staple
cartridge is locked.
7. Remove the tape from the staple cartridge by pulling it straight.
8. Insert the staple box.
9. Push the stapler section back into the finisher.
10. Close the front cover.
Make a test print or copy in the staple sort mode to ensure that stapling is performed
properly.
Press the lock button to unlock the staple box cover and
remove the staple cartridge.
After inserting the staple cartridge, press down on the
staple box cover to lock the cartridge in place.
Push the staple box in until it clicks into place.
Xerox WorkCentre C226 User Guide