Xerox WorkCentre C226 User Manual page 281

NOTES:
Xerox WorkCentre C226 User Guide
9. Touch the [OK] key.
OK
1 Group
10. Touch the [ADDRESS DIRECTORY] key.
Address
Directory
-Mail Address Sender List
Address Review
11. Touch the one-touch key for the desired destination.
Ready To Send.
To CC BCC
Test1 Test2
Test3 Test4
Test5 Test6
Frequent Use ABCD EFGHI JKLMN
When transmitting by Scan to E-mail
Make sure that the [TO] key is highlighted and then touch the one-touch key of the
destination. If you wish to perform a broadcast transmission, "CC" or "BCC"
copies, touch the [CC] or [BCC] key and then touch the one-touch keys of the
"CC" or "BCC" recipients.
• Refer to pages 4-10 to 4-15 for information on programming one-touch key
destinations.
• When touching a one-touch key, corresponding information from the email
destination screen is shown in the message display. Up to 36 characters can be
displayed in the message screen, regardless of the number of characters that
have been entered (up to 50 characters of an e-mail address are displayed).
• You can also manually enter the address of a Scan to E-mail destination, or select
multiple destinations for a broadcast transmission. (page 4-27)
The address directory screen appears.
The key you touched is highlighted. If you touch the
wrong key, touch the key again to cancel the selection.
The key display will return to normal.
OPQRS
Basic Transmission Method
4-25