Xerox WorkCentre C226 User Manual page 97

Problem
Cannot be
punched.*
Xerox WorkCentre C226 User Guide
Check
Message to check the Punch Module
displayed?
Mixed paper sizes?
Paper is badly curled and the output
paper is not punched.
* When a hole Punch Module is installed
Saddle Stitch Finisher
Solution or cause
Dispose of punch scraps. (See page 1-
66.)
Punching is not possible when different
paper sizes are mixed together.
Differences in paper quality and type
may result in bad curling of output paper.
Take the paper out of the tray or Bypass
Tray, turn it around, and reload it so that
the top and bottom edges are reversed.
1-71