Xerox WorkCentre C226 User Manual page 227

NOTE:
Xerox WorkCentre C226 User Guide
[Contrast]
This shows the amount of contrast between white and black. The contrast can be
set to a value from 0 to 100. The contrast increases as the value is increased.
Default setting: 50
Defaults
Returns the image adjustment settings to the default settings.
Color Balance
This item is used to adjust the colour saturation and strengthen or weaken the R
(red), G (green), and B (blue) components of colour.
[Saturation]
This adjusts the colour saturation. Select a value between 0 and 100.
Default setting: 50
[Red Strength]
Strengthens or weakens red.
Default setting: 50
[Green Strength]
Strengthens or weakens green.
Default setting: 50
[Blue Strength]
Strengthens or weakens blue.
Default setting: 50
These cannot be changed if the colour mode was set to [Gray Scale] in step
page 3-37.
Selecting Printing Functions
on
3-39