Manual Selection - Xerox WorkCentre C226 User Manual

Copier Operation

Manual selection

NOTE:
2-30
7. Press the [COLOUR COPY START (
key.
To cancel the auto image mode, touch [More...] on the Copy Ratio display, then
touch the [AUTO IMAGE] key again to clear the highlighted display.
The preset ratios (maximum 400%, minimum 25%) can be selected with the enlarge-
ment and reduction keys. In addition, the zoom keys can be used to select any ratio
from 50% to 200% in increments of 1%.
When the DADF is used, the ratio can only be set within the range 50% to 200%.
1. Place the original in the DADF tray or on the document glass (pages 2-4 to 2-10).
2. Touch the [More...] key in the Copy Ratio display.
3. Use the [MENU] key to select menu "
Menu
Ready To Copy.
100
%
Zoom
B4 B5 B5 A5 A4 B5
70 81
% %
A3 A4 B4 A4 A3 B4
B5 A4 A5 B5 B5 B4
115 % 122 % 141
B4 A3 A4 B4 A4 A3
XY Zoom Menu
1
• A. Preset reduction copy ratios are:
70%, 81% and 86% (for the AB system).
• 77% and 64% (for the inch system).
B. Preset enlargement copy ratios are:
115, 122% and 141% (for the AB system).
121% and 129% (for the inch system).
)] or [BLACK COPY START (
If you placed the original on the document glass, set the
output to "Sort", you must touch the [READ-END] key
after all pages of the original have been scanned (step 7
on page 2-23).
" or menu "
0
Auto
OK
Original
AUTO
Exposure
86
%
Auto A4
100 %
% Paper Select
Auto Image
2
Copy Ratio
" for copy ratio selection.
Xerox WorkCentre C226 User Guide
)]