Xerox WorkCentre C226 User Manual page 110

Copier Operation
NOTE:
Group
1 INCH - 1
2 INCH - 2
3 AB - 1
4 AB - 2
2-6
Original size detection function
One of the four groups of standard original sizes shown below can be selected for
detection by the original size detection function. The factory default setting is "AB-1
(INCH-1)". The setting can be changed using "Original size detector setting" in the key
operator programs.
Detectable original sizes
DADF tray (for reversing single pass feeding) or document glass
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"*
11" x 17", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"*
A3, A4, A4R, A5, B4, B5, B5R
A3, A4, A4R, A5, B5, B5R, 8-1/2" x 13"
* When the DADF is used, these sizes are only supported for one-sided originals.
Xerox WorkCentre C226 User Guide