Custom Settings - Xerox WorkCentre C226 User Manual

Custom Settings

Xerox WorkCentre C226 User Guide
5. Touch the type of envelope, and go to step 7.
Com-10
Monarch
DL
6. If you inserted a non-standard size of paper in the Bypass Tray, remove the
checkmark from "ENABLE AUTO SIZE DETECTION" and then touch the [EXTRA
SIZE] tab. When the screen opens, the X key will be highlighted. Use the
touch keys to enter the X dimension. If you inserted a standard size of paper in
the Bypass Tray, make sure that a checkmark appears in the [ENABLE AUTO
SIZE DETECTION] checkbox.
Enable Auto Size Detection
Extra Size
OK
(139 432)
X 139
mm
(100 297)
Y
100
mm
Basic Setting
Extra Size
7. Touch the [OK] key to complete the setting.
The items that can be set with the custom settings are shown below.
Total count
Display contrast
List print
Clock adjust
OK
C5
Basic Setting
Next touch the key to highlight it and enter the
dimensions for Y.
The permitted range for the X dimension is 139 to 432
mm (5-1/2 to 17 inches), and the permitted range for the
Y dimension is 100 to 297 mm (4 to 11-3/4 inches).
The number of pages processed by the machine and
optional equipment can be displayed. (See page 1-40.)
Used to adjust the contrast of the operation panel display.
(See page 1-41.)
Used to print a list of machine settings. (See page 1-41)
Used to set the date and time of the built-in clock of the
machine. (See page 1-39.)
Custom Settings
and
1-37