Loading Paper In The Stand/1-Tray Unit/3-Tray Unit - Xerox WorkCentre C226 User Manual

General Information

Loading paper in the stand/1-Tray Unit/3-Tray Unit

NOTE:
1-28
2. Lower the two fusing unit pressure adjusting levers marked A and B in the
illustration.
Normal
position
Lower pressure
B: Front side of
position
fusing unit
3. Gently close the Duplex Bypass/Inverter Unit.
Upper tray / middle tray / lower tray*
Up to 500 sheets of paper recommended for colour or Xerox-recommended plain
paper can be loaded in these trays. The method of loading paper is the same as for
Paper Tray 1 in the main unit (see the explanation on page 1-21).
* The stand/1-Tray Unit only has the upper tray.
If the size of paper being loaded is different from the previous size, or is an extra size,
or if the paper type is different from the previous type, you must change the paper tray
settings in the custom settings. Change the settings as explained in "Setting the paper
type (except the Bypass Tray)" on page 1-33 and "Setting the paper size when an
extra size is loaded" on page 1-34.
A
B
A: Rear side of
fusing unit
If the machine is not equipped with a Duplex Bypass/
Inverter Unit, close the side cover.
Xerox WorkCentre C226 User Guide