Printing Using Optional Peripheral Equipment - Xerox WorkCentre C226 User Manual

Printer Operation
NOTE:

Printing using optional peripheral equipment

3-12
5. If you need to adjust the colour image quality, perform the following step. If you do
not need to adjust the image quality, go directly to step 6.
To adjust the colour image quality, click the [Color Adjustment] button. The
following screen will appear. Use the [Color Balance] field to adjust the saturation
of colour images, and strengthen or weaken the RGB (red, green, and blue) colour
components.
Use the [Image] field to adjust the brightness and contrast of colour images.
(page 3-38)
When finished, go to step 6.
6. Click the [Paper] tab.
Make sure that the paper size is correct. Next, configure the "Paper Selection"
settings. "Auto Select" is normally used for both "Paper Source" and "Paper Type".
When you have completed the settings, click the [OK] button to close the printer
properties window.
Using the Bypass Tray
When the paper source is set to the Bypass Tray, be sure to set the paper size and
paper type on the machine's operation panel. This procedure is explained on page 1-
23).
7. Click the [OK] button in the Print window in Windows 95/98/Me/NT 4.0, or the
[Print] button in Windows 2000/XP/Server 2003.
The procedure for printing from WordPad *
explained below. If you do not have any documents created in WordPad, create a doc-
ument that can be used for test printing.
*1 This is a standard accessory program in Windows.
1. Open a document created in WordPad.
1
using optional peripheral equipment is
Xerox WorkCentre C226 User Guide