Xerox WorkCentre C226 User Manual page 398

Fax Unit
NOTES:
n Press [Ok].
No. Via The 10-Key Pad, Then Press [Ok
5-70
9. Use the numeric keys to enter the fax number.
Direct Address / Individual
Fax No.
Enter The Fax No. Via The 10-Key Pad, Then Press [Ok].
0666211221
To insert a pause between digits of the number, touch the [PAUSE] key. The pause
appears as a hyphen "-". Refer to "Pause time setting" in the "Fax Unit" section of the
WorkCentre C226 System Administration Guide to set the duration of the pause.
If you make a mistake, press the [C] key to clear one digit at a time, and then enter the
correct digit(s).
If you are not going to enter a sub-address and passcode after the fax number, pro-
ceed to step 12.
• For information on sub-addresses and passcodes, see "Transmission Between
Machines Supporting F-codes" on page 5-49.
• A maximum of 64 digits can be entered, including the fax number, sub-address,
passcode, any pauses (hyphens), and slashes "/" (to separate the sub-address
and passcode).
10. If you need to enter a sub-address, touch the [SUB ADDRESS] key and then enter
the sub-address with the numeric keys.
Cancel Ok
Pause
Sub Address
11. If you wish to enter a passcode, touch the [SUB ADDRESS] key once again and
enter the passcode with the numeric keys.
0666211221/3456/
Next Exit
Cancel Ok
Pause
Sub Address
When you touch the [SUB ADDRESS] key, a slash is
entered after the fax number. Continue by entering the
sub-address (max. 20 digits).
If you do not wish to enter a passcode, proceed to step
12.
When you touch the [SUB ADDRESS] key, a slash is
entered after the sub-address. Continue by entering the
passcode (max. 20 digits).
Xerox WorkCentre C226 User Guide