Xerox WorkCentre C226 User Manual page 250

Printer Operation
Problem
Printing is not on Has paper selection been set to Auto-
desired paper size. matic in the printer driver?
Printer write error Is the timeout setting for the printer
occurs when print- driver too short?
ing from the parallel
port.
A notice page is Has the number of hold jobs reached
printed when a print 99?
job is sent to the
printer for retention.
Password entry is Did you enter a password for the
requested. retention function?
In some cases the Did you run out of paper during print-
printed image may ing?
be rotated 90
degrees with
respect to paper
placed horizontally
in the Bypass Tray.
Colour documents Is the [Color Mode] setting set to
print in black and [Color] in the Color tab of the printer
white. driver?
Is the correct printer driver selected in
the software application?
Though selected in Does the application support colour
the software appli- printing?
cation, colour print-
Is the correct printer driver selected?
ing does not take
place.
The colour balance Is the [Color Mode] setting set to
cannot be adjusted. [Color] in the Color tab of the printer
driver?
3-62
Check Solution or cause
Ensure that the desired paper is set in a
paper tray of the printer and select "Auto
Select" in the paper selection of the printer
driver.
Set a longer time in the timeout setting in
the printer driver.
Delete unneeded hold jobs. If you wish to
delete all hold jobs, use the [DELETE THE
PRINT HOLD DATA] key operator program
(page 3-55).
Password is needed when executing print-
ing. If the password is not known, printing
cannot be executed.
When using the Bypass Tray, it is recom-
mended that paper be placed vertically.
Landscape
orientation
Set the [Color Mode] to [Color] (page 3-37).
Select the correct printer driver.
Read the application manual to see if colour
printing is supported.
Select the correct printer driver.
Set the [Color Mode] to [Color] (page 3-37).
Xerox WorkCentre C226 User Guide
Portrait
orientation