Xerox WorkCentre C226 User Manual page 188

Copier Operation
Problem
Image cannot be Is the auto paper select or auto image
rotated. function set?
Part of original Is the original positioned correctly?
image is not cop-
Is the copy ratio proper for the original
ied.
and paper sizes?
Blank copies Is the original placed correctly?
Order of copies Is the order of originals correct?
incorrect
Job cancellation Is a message requesting cancellation of
needed job displayed?
Scanning of origi- Is a message indicating memory is full
nals is incomplete. displayed?
The selected num- For an interrupt copy job, are you
ber of sets of cop- attempting colour copying in sort mode?
ies is not printed.
Not all pages are When making copies, the memory
copied became full during scanning of the origi-
nals and a message appears asking you
whether you want to continue copying or
cancel.
2-84
Check Solution or cause
Rotation copy functions only if the
machine is either in the auto paper select
mode or in the auto image mode (see
page 2-8).
Set the original properly (page 2-4).
Use the auto image function to select the
appropriate copy ratio based on the origi-
nal and copy sizes (see page 2-28).
When using the document glass, place
the original face down.
When using the DADF, place original
face up.
When using the document glass, set the
originals from the first page one sheet at
a time.
When using the DADF, set the originals
with the first page up.
Press the [CLEAR ALL] key to cancel the
current job.
If the data amount exceeds the limit
when using the pamphlet copy or multi
shot copy which requires scanning of all
originals, scanning will be cancelled and
copying will not be performed.
If you install an additional memory, the
storage capacity will increase.
When colour copying is performed in sort
mode for an interrupt copy job, only one
set of copies can be made. If more than
one set is needed, replace the original
and repeat the copy procedure for each
set needed.
When the memory becomes full during
scanning of the originals, you can select
whether you want to continue the job and
print only those originals that were
scanned, or cancel the job. If you con-
tinue the job, copies will only be made of
the originals that were scanned, and thus
all originals cannot be copied at once.
Xerox WorkCentre C226 User Guide