Size And Weight Of Acceptable Originals; Setting Originals; When Using The Dadf - Xerox WorkCentre C226 User Manual

Copier Operation

Setting Originals

2-4

Size and weight of acceptable originals

A5 or
5-1/2" x 8-1/2"
Original size:
(148 x 210 mm)
Weight (thickness):
56g/m or 2
2
... Weight of a sheet of paper of 1 m
g/m
Notes on use of the DADF
• Use originals within the specified size and weight ranges. Use of originals out of
the specified range may cause an original misfeed.
• Before loading originals into the DADF tray, be sure to remove any staples or
paper clips.
• If originals have damp spots from correction fluid, ink or glue from pasteups, be
sure they are dried before they are fed. If not, the interior of the DADF or the doc-
ument glass may be soiled.
• To prevent incorrect original size detection, original misfeeds or smudges on cop-
ies, use the following as a guide for feeding originals.
Transparency film, tracing paper, carbon paper, thermal paper or originals printed
with thermal transfer ink ribbon should not be fed through the DADF. Originals to
be fed through the feeder should not be damaged, crumpled or folded or have
loosely pasted paper on them or cutouts in them.

When using the DADF

1. Adjust the original guides to the size of the originals.
A3 or
11" x 17"
(297 x 420 mm)
15 lbs. 90g/m or 2 24 lbs.
2
Xerox WorkCentre C226 User Guide