Centring - Xerox WorkCentre C226 User Manual

Copier Operation
NOTE:

Centring

[Example]
Original
2-44
4. Ensure that A4 (8-1/2" x 11") size paper is selected.
About the steps that follow
For two-sided copying, follow steps 2 through 4 beginning on page 2-24 and then fol-
low steps 4 through 7 beginning on page 2-23.
For one-sided copying, follow steps 4 through 7 beginning on page 2-23.
To cancel the dual page copy function, touch the [DUAL PAGE COPY] key on the spe-
cial modes screen (step 1). (The highlighted display will be cancelled.)
To erase shadows caused by document binding, use the edge erase function (page 2-
41). (Centre Erase and Edge + Centre Erase cannot be used in combination.)
When the original and copy paper are of different sizes, CENTRING is used to shift the
image to the centre of the copy paper but only in the left to right direction.
Copy
1. Touch the [CENTRING] key on the SPECIAL MODES screen.
Margin Shift
Centring
2. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
If A4 (8-1/2" x 11") size paper is not selected, touch the
appropriate key in the Paper Select display to select A4 (8-
1/2" x 11") size paper.
• This function can be used to reduce a larger sized origi-
nal image and centre it on a copy of smaller paper size,
as well as centre a smaller original onto a larger sized
copy.
• This function will not work when non-standard size origi-
nals or copy paper are used. This function cannot be
selected when enlargement copying has been selected.
The [CENTRING] key is highlighted to indicate that the
function is turned on, and the centring icon (
appear in the upper left of the screen.
Xerox WorkCentre C226 User Guide
) will