Covers; Copying Onto A Cover - Xerox WorkCentre C226 User Manual

Covers

Xerox WorkCentre C226 User Guide
The COVERS mode is used to place covers on the front, back, or both the front and
back of multipage documents.
This function can only be used when the originals are placed in the DADF tray of the
DADF. (The document glass cannot be used.)

Copying onto a cover

One-sided copies from one-sided or two-sided originals
One-sided originals
4
3
2
1
1
SHARP
Cover original
SHARP
Two-sided originals
4
2
2
1
SHARP
SHARP
Cover original
Two-sided copies from one-sided or two-sided originals
One-sided originals
4
3
2
1
SHARP
Cover original
Two-sided originals
3
1
SHARP
Cover original
Selections for front cover, back cover, or front and back
cover can be made.
Back cover sheets cannot be copied on, either on the
front side or on the back side.
One-sided copies
(copying onto a cover)
4
3
2
Back cover
(no copying)
Front cover
(can copy onto front side)
5
4
3
Back cover
(no copying)
Front cover
(can copy onto front side)
Two-sided copies
(copying onto a cover)
Back cover
(no copying)
3
1
SHARP
Front cover
(can copy onto front side)
(Back side of cover is blank)
Special Modes
2-47